CNC router machine tool wear judgment maintenance precautions

During the use of CNC router machines, how to reduce the wear and tear of tools have attracted attention. Next, SIGN CNC will answer you in detail.

1. How to judge the tool wear condition

01 Judge the wear status according to the processing status of the engraving machine. For example, the processing parameters and other settings are within the normal range. Change the tool immediately.

02 The most direct way to judge is to "listen" to the sound. If there is a "screaming" sound during the processing, it can be judged that the tool processing status is abnormal. At this time, the processing can be suspended to find out the reason. If the quality problems of the tool itself, the problem of tool clamping, and the problem of tool parameters are excluded, it proves that the tool is worn out and the tool needs to be replaced in time.

2. Extend the service life of tools

01 Choose the right tool: For engraving high-hardness materials, you need to use the corresponding tool, otherwise it is easy to break the tool.

02 Tool maintenance: After processing, the tool must be kept properly, and daily maintenance should be done to prepare for the next use of the tool.

03 During the engraving process, the tool that is broken in the material should be taken out in time to avoid secondary breakage of the tool at the same position.

04 Engraving speed: When engraving high-hardness materials, the knife speed should not be too fast.