FAQ for laser cleaning welding machine

Q1: I am currently at the stage of launching the laser，what should I pay attention to？

The following are precautions when operating for your information.

 1.Turn on the power and the water cooler and the temperature reaches 20°C, then you can start the laser system

 2.The laser cleaning head is equipped with safety protection.

Double-click the button for 1.5 seconds to emit the laser to prevent accidental touch and misoperation.

3. Open the gas valve, commonly used inert gases such as 99.9% argon, nitrogen and other oil-free and water-free purity

Q2:Can the length of the fiber be 15 m?

1.Firstly,due to the machine is relatively small and it is more convenient to move, our standard 10-meter length can ensure the perfect stability of the cleaning system and basically meet your processing needs.

2.Secondly, the delivery time of customized products will be extended and .If the standard 10-meter line, the delivery time is 3-5 working days; if for 15-meter lengthened line may need 10-12 working days.

3.Finally, if you review the above information and still want to customize the 15m long fiber optic cable, we can provide it and will send you more details later.

Q3:Does the laser have an exhaust gas extraction system?

After cleaning the paint, you can see some smoke, and the floating rust is not so obvious，so special gas treatment is basically unnecessary. In addition we face an open working environment, it is not recommended to add an exhaust gas extraction system.

Q4:What technical parameters should the gas have?

Inert gas with a purity of 99.9%, no oil and no water, such as argon, nitrogen.Argon Purity 99.9% Consumption Stainless steel 15-20 liters per minute, galvanized aluminum sheet more than 25 liters per minute.The air compressor with high cost needs to add a tertiary filter to discharge the water and oil in the air.